Malfunction junction goes high-tech

Does your road-rage quotient rise around construction sites? Have you long harbored smoldering anger at Asheville’s renowned “malfunction junction,” aka the approach routes to the interchange for Interstates 26 and 40? Are you baffled and perplexed by the construction going on there now?

Life in the fast lane: Schedules and updates on the I-16/I-40 approach lanes are only a few clicks away on this new Web site.

Rest (and drive) easy. A splashy new Web site commissioned by Taylor & Murphy Construction Co. will keep motorists informed on a timely basis, so they can negotiate the construction hazards with aplomb.

Chris Britton, vice president of Taylor & Murphy, says creating a Web site was part of the company’s contract with the state Department of Transportation for the construction around the interchange. But there were problems with the original design, and it has now been retooled.

“We did feel like having a Web site for the job would be beneficial for the project—for any information we could put out there for major traffic shifts, and just to let people know where we are in the project,” Britton explains.

Visit www.I40widening.com and you can learn about the history and scope of the project, which began in 2005 and is slated for completion late this summer, says Britton. The site provides schedules and updates as well as descriptions of the electronic warning systems for drivers, hours for specific types of work, and information on lane openings.

Taylor & Murphy also spells out its considerable incentive to meet the fall 2008 deadline: According to the Web site, failure to do so could trigger fines as high as $10,000 per day, and—if lanes had to be closed during peak-traffic periods—additional penalties of $10,000 per hour.

When the work is done, there’ll be an additional traffic lane on each side of I-40 between the Smoky Park Highway (U.S. 19/23) and the I-40/I-26 interchange—eliminating the bottleneck caused by the abrupt end of the current eastbound lane leading onto I-40, and facilitating better traffic flow on the two-mile stretch. The I-40 overpasses spanning 19/23 will be replaced by a new bridge that will allow for future widening of the highway.

SHARE

Thanks for reading through to the end…

We share your inclination to get the whole story. For the past 25 years, Xpress has been committed to in-depth, balanced reporting about the greater Asheville area. We want everyone to have access to our stories. That’s a big part of why we've never charged for the paper or put up a paywall.

We’re pretty sure that you know journalism faces big challenges these days. Advertising no longer pays the whole cost. Media outlets around the country are asking their readers to chip in. Xpress needs help, too. We hope you’ll consider signing up to be a member of Xpress. For as little as $5 a month — the cost of a craft beer or kombucha — you can help keep local journalism strong. It only takes a moment.

Before you comment

The comments section is here to provide a platform for civil dialogue on the issues we face together as a local community. Xpress is committed to offering this platform for all voices, but when the tone of the discussion gets nasty or strays off topic, we believe many people choose not to participate. Xpress editors are determined to moderate comments to ensure a constructive interchange is maintained. All comments judged not to be in keeping with the spirit of civil discourse will be removed and repeat violators will be banned. See here for our terms of service. Thank you for being part of this effort to promote respectful discussion.

One thought on “Malfunction junction goes high-tech

Leave a Reply to Nam Vet ×

To leave a reply you may Login with your Mountain Xpress account, connect socially or enter your name and e-mail. Your e-mail address will not be published. All fields are required.